Transland Stainless Steel Spreaders

High Speed & High Volume!

​Discover the efficiency and precision of Transland spreaders, the leading choice in agricultural and aerial application technology. Since the 1950s, our company has been perfecting crop duster spreaders. Our focus is to engineer and build spreaders to optimize the distribution of dry material, enhancing crop yield and sustainability.

Transland first produced aluminum spreaders for sliding gates on Stearmans, then using stainless steel when the SwathMaster began production in 1959. Since 1965, virtually all spreaders have been made with stainless steel. With higher-speed aircraft being developed, the thickness of stainless steel has gone from .020 to .032 thick sheets.

Transland spreaders are available in various configurations to fit Transland gate boxes. Various vane depths are available depending on the type of application required.

Transland Original Spreaders installation or removal is quick, easy, and requires only a few minutes. Explore our range today.

 

Transland offers a helpful chart to give customers a starting point for selecting the most suitable spreader.

Download the Spreader & SwathMaster Guide for quick access to all part information.

 

Need a GPS that simplifies your job when doing dry work? Discover the Satloc Falcon Pro!

20160

8 Vane High Volume Spreader for 25" Gate with 5" Door

Most commonly used spreader on Cessna, Stearman, & Ag-Cat aircraft.

22360

8 Vane Spreader for 25" Gate with 5" Door

Only spreader for Brave; jointly designed by Transland & Piper.

22358

8 Vane Heavy Duty Spreader for 38" Gate with 5" Door

Most widely used spreader on Air Tractor (foam filled)

23538

10 Vane Deep Throat Spreader for 38" Gate with 5" Door

Deep throat spreader for 5″ door on Air Tractor.

24502

10 Vane Spreader for 38" Gate with 5" Door

Spreader for planes with Garrett engine, counter-clockwise, on Air Tractor.

22008

8 Vane Deep Throat Spreader for 38" Gate with 5" Door

Only spreader for Brave; jointly designed by Transland & Piper.

23502

10 Vane Spreader for 38" Gate with 5" Door

Most popular 10-vane spreader on Air Tractor.

23547

10 Vane Deep Throat Spreader for 38" Gate with 7.5" Door

10-Vane for 7 1/2″ gate box.

23537

10 Vane Deep Throat Spreader for 38" Gate with 10" Door

10-Vane for 10″ fire gate on Air Tractor.

20250

8 Vane High Volume Spreader for 41" Gate with 5" Door

Mostly used on Thrush and M18 aircraft.

22007

8 Vane Deep Throat Spreader for 41" Gate with 5" Door

Deep throat spreader for high volume on Thrush and M18.

23501

10 Vane Spreader for 41" Gate with 5" Door

Original 10 vane spreader designed for Thrush and M18 aircraft.

23533

10 Vane High Volume Spreader for 41" Gate with 10" Door

Used with 10″ fire gate on Thrush.

23506

10 Vane Deep Throat Spreader for 41" Gate with 5" Door

10-Vane deep throat spreader on Thrush.

23543

10 Vane Deep Throat Spreader for 41" Gate with 7.5" Door

10-Vane deep throat spreader on Thrush.

23541

10 Vane Spreader for 41" Gate with 5" Door

Used with a 5″ door on a Garrett engine on Thrush.

23633

10 Vane Deep Throat Spreader for 41" Gate with 10" Door

Used with a 10″ fire gate on a Thrush with Garrett engine.

All Transland spreaders now come standard with fingers to diffuse the rope effect of the material. This feature can add up to seven feet of swath width. More importantly, the fingers improve swath patterns. Finger kits are available for older spreader models. Transland even has a kit for  13-vane spreader.

55127

Finger Kits for Spreaders 23537 & 23547

55128

Finger Kits for Spreaders 23501 & 23502

55129

Finger Kits for Spreaders 22007 & 22008

To produce more consistency in dry work, adding door straightening vanes to the gate box door and the fairing in front of the gate is recommended. Notably, most spreaders maintain a consistent pattern and swath width of up to 250 lbs of material per acre. Beyond this point, an increase in pounds per acre may lead to a reduction in swath width. Another aspect of this is that the more it is opened, the more the airflow is reduced. The vanes in the throat of the spreader are adjustable. Remember, the setting from the factory is based on testing, in conjunction with Dennis Gardisser and Mike Lee, for the optimal setting for the best overall performance of Transland Spreaders.

50025

Straightening Door Vanes for 25" Gate Box with 5" Door

50041

Straightening Door Vanes for 41" Gate Box with 5" Door

50038

Straightening Door Vanes for 38" Gate Box with 5" Door

51036

Straightening Door Vanes for 38" Gate Box with 7.5" Door

For the older models with three holes in the door mounting of the gate.

51037

Straightening Door Vanes for 38" Gate Box with 7.5" Door

For the newer models with four holes in the door mounting of the gate.

51041

Straightening Door Vanes for 41" Gate Box with 10" Door

51038

Straightening Door Vanes for 38" Gate Box with 10" Door

Straightening Vanes for fairings are aerodynamic components used on crop duster airplanes to streamline airflow and reduce drag. This is particularly important for crop dusters, as they often fly at low altitudes and slower speeds than other aircraft, making them more susceptible to aerodynamic inefficiencies. The straightening Vanes for fairings are designed to smooth the airflow around the plane’s gate box, reducing turbulence and drag. This allows for more airflow through the spreader.

16979

4.5" Straightening Fairing Vanes

Used on AT 402/502

16999

14" Straightening Fairing Vanes

17004

18" Straightening Fairing Vanes

Straightening Vanes (PN 16999) for Fairings only work with the below listed **Fairing Part Numbers**:

▶ 57000 – 7.5” Gate Box on an AT-802

▶ 57002 – 7.5” Gate Box on an AT-602

The design of the vane extensions, which are attached to the vanes on the throat of the spreader, considers the material flow’s aerodynamics. By controlling the flow, the vanes help maximize the spreading process’s efficiency. Vane extensions help to fan out the material more evenly across a wider swath. This is important for ensuring that the spread pattern is uniform, which is critical for effectively applying the material. Some vane extensions may be adjustable, allowing the pilot or ground crew to change the spread pattern and width depending on the application requirements and weather conditions. This adjustability means the aircraft can be fine-tuned for different materials and application rates. 

55124

Vane Extension Kit for 10-Vane Spreader

For Spreaders 23501 & 23502 (Includes 10x 23439 Vane Extensions)

54498

Vane Extension Kit for 8-Vane Spreader

For Spreaders 20240 (Includes 4x 21796 & 4x 21797 Vane Extensions)

54424

Vane Extension Kit for 8-Vane Spreader

For Spreaders 20250 & 20160 (Includes 4x 21796 & 4x 21797 Vane Extensions)

55125

Vane Extension Kit for 8-Vane Spreader

For Spreaders 22007 (Includes 3x 23435, 3x 23436, 1x 23437, & 1x 23438 Vane Extensions)

23499

QD for 25" Gate Boxes

For Ag Cat

23507

QD for All 25" Gate Boxes

23505

QD for 38" Gate Boxes

For Air Tractor & Ag Cat (old style)

25505

QD for 38" Gate Boxes

For Air Tractor & Ag Cat (new style with studs)

23504

QD for 41" Gate Boxes

For Thrush & Dromader

Transland offers hanger kits designed to secure the spreader’s trailing edge directly to the aircraft’s fuselage. If a suitable hanger kit is not available from Transland for your specific model, you will need to procure or fabricate appropriate hangers to ensure the spreader is properly attached at the trailing edge.

58564

Spreader Hanger Kit

No Clevis on Ends

58567

Spreader Hanger Kit

Clevis on One End

58575

Spreader Hanger Kit

Clevis on Both Ends

The Transland Spreader Cart is made from stainless steel with a front-loading design and features a hydraulic lift for ease of use. Its design is so efficient that a single person can easily attach and detach the spreader.

50067

Spreader Cart