![Spreaders Header Image](https://www.translandllc.com/wp-content/uploads/2023/10/Spreaders-Header-Image.png)
![Dry Dispersal Side View](https://www.translandllc.com/wp-content/uploads/2023/11/Dry-Dispersal-Side-View.png)
Transland Stainless Steel Spreaders
High Speed & High Volume!
Discover the efficiency and precision of Transland spreaders, the leading choice in agricultural and aerial application technology. Since the 1950s, our company has been perfecting crop duster spreaders. Our focus is to engineer and build spreaders to optimize the distribution of dry material, enhancing crop yield and sustainability.
Transland first produced aluminum spreaders for sliding gates on Stearmans, then using stainless steel when the SwathMaster began production in 1959. Since 1965, virtually all spreaders have been made with stainless steel. With higher-speed aircraft being developed, the thickness of stainless steel has gone from .020 to .032 thick sheets.
Transland spreaders are available in various configurations to fit Transland gate boxes. Various vane depths are available depending on the type of application required.
Transland Original Spreaders installation or removal is quick, easy, and requires only a few minutes. Explore our range today.
Transland offers a helpful chart to give customers a starting point for selecting the most suitable spreader.
Download the Spreader & SwathMaster Guide for quick access to all part information.
Need a GPS that simplifies your job when doing dry work? Discover the Satloc Falcon Pro!
![Ag-Cat. Cessna. Brave](https://www.translandllc.com/wp-content/uploads/2023/11/Ag-Cat.-Cessna.-Brave.png)
20160
8 Vane High Volume Spreader for 25" Gate with 5" Door
Most commonly used spreader on Cessna, Stearman, & Ag-Cat aircraft.
22360
8 Vane Spreader for 25" Gate with 5" Door
Only spreader for Brave; jointly designed by Transland & Piper.
![Air Tractor Aircraft](https://www.translandllc.com/wp-content/uploads/2023/11/Air-Tractor-Aircraft.png)
22358
8 Vane Heavy Duty Spreader for 38" Gate with 5" Door
Most widely used spreader on Air Tractor (foam filled)
23538
10 Vane Deep Throat Spreader for 38" Gate with 5" Door
Deep throat spreader for 5″ door on Air Tractor.
24502
10 Vane Spreader for 38" Gate with 5" Door
Spreader for planes with Garrett engine, counter-clockwise, on Air Tractor.
22008
8 Vane Deep Throat Spreader for 38" Gate with 5" Door
Only spreader for Brave; jointly designed by Transland & Piper.
23502
10 Vane Spreader for 38" Gate with 5" Door
Most popular 10-vane spreader on Air Tractor.
23547
10 Vane Deep Throat Spreader for 38" Gate with 7.5" Door
10-Vane for 7 1/2″ gate box.
23537
10 Vane Deep Throat Spreader for 38" Gate with 10" Door
10-Vane for 10″ fire gate on Air Tractor.
![Thrush Aircraft](https://www.translandllc.com/wp-content/uploads/2023/11/Thrush-Aircraft.png)
20250
8 Vane High Volume Spreader for 41" Gate with 5" Door
Mostly used on Thrush and M18 aircraft.
23501
10 Vane Spreader for 41" Gate with 5" Door
Original 10 vane spreader designed for Thrush and M18 aircraft.
23533
10 Vane High Volume Spreader for 41" Gate with 10" Door
Used with 10″ fire gate on Thrush.
22007
8 Vane Deep Throat Spreader for 41" Gate with 5" Door
Deep throat spreader for high volume on Thrush and M18.
23506
10 Vane Deep Throat Spreader for 41" Gate with 7.5" Door
10-Vane deep throat spreader on Thrush.
23541
10 Vane Spreader for 41" Gate with 5" Door
Used with a 5″ door on a Garrett engine on Thrush.
23633
10 Vane Deep Throat Spreader for 41" Gate with 10" Door
Used with a 10″ fire gate on a Thrush with Garrett engine.
![Spreaders Accessories Image](https://www.translandllc.com/wp-content/uploads/2023/11/Spreaders-Accessories-Image.png)
![Fingers in Spreaders v1](https://www.translandllc.com/wp-content/uploads/2023/11/Fingers-in-Spreaders-v1.png)
All Transland spreaders now come standard with fingers to diffuse the rope effect of the material. This feature can add up to seven feet of swath width. More importantly, the fingers improve swath patterns. Finger kits are available for older spreader models. Transland even has a kit for 13-vane spreader.
55127
Finger Kits for Spreaders 23537 & 23547
55128
Finger Kits for Spreaders 23501 & 23502
55129
Finger Kits for Spreaders 22007 & 22008
To produce more consistency in dry work, adding door straightening vanes to the gate box door and the fairing in front of the gate is recommended. Notably, most spreaders maintain a consistent pattern and swath width of up to 250 lbs of material per acre. Beyond this point, an increase in pounds per acre may lead to a reduction in swath width. Another aspect of this is that the more it is opened, the more the airflow is reduced. The vanes in the throat of the spreader are adjustable. Remember, the setting from the factory is based on testing, in conjunction with Dennis Gardisser and Mike Lee, for the optimal setting for the best overall performance of Transland Spreaders.
50025
Straightening Door Vanes for 25" Gate Box with 5" Door
50041
Straightening Door Vanes for 41" Gate Box with 5" Door
50041
Straightening Door Vanes for 41" Gate Box with 10" Door
50038
Straightening Door Vanes for 38" Gate Box with 5" Door
51037
Straightening Door Vanes for 38" Gate Box with 7 1/2" Door
51038
Straightening Door Vanes for 38" Gate Box with 10" Door
![Straightening Door Vanes](https://www.translandllc.com/wp-content/uploads/2023/11/Straightening-Door-Vanes.png)
![Straightening Fairing Vanes](https://www.translandllc.com/wp-content/uploads/2023/11/Straightening-Fairing-Vanes.png)
Straightening Vanes for fairings are aerodynamic components used on crop duster airplanes to streamline airflow and reduce drag. This is particularly important for crop dusters, as they often fly at low altitudes and slower speeds than other aircraft, making them more susceptible to aerodynamic inefficiencies. The straightening Vanes for fairings are designed to smooth the airflow around the plane’s gate box, reducing turbulence and drag. This allows for more airflow through the spreader.
16999
Straightening Fairing Vanes
Straightening Vanes (PN 16999) for Fairings only work with the below listed **Fairing Part Numbers**:
▶57000 – for a 7 1/2” Gate Box on an AT-802
▶57002 – 7 1/2” Gate Box on an AT-602
The design of the vane extensions, which are attached to the vanes on the throat of the spreader, considers the material flow’s aerodynamics. By controlling the flow, the vanes help maximize the spreading process’s efficiency. Vane extensions help to fan out the material more evenly across a wider swath. This is important for ensuring that the spread pattern is uniform, which is critical for effectively applying the material. Some vane extensions may be adjustable, allowing the pilot or ground crew to change the spread pattern and width depending on the application requirements and weather conditions. This adjustability means the aircraft can be fine-tuned for different materials and application rates.
55124
Vane Extension Kit for 10-Vane Spreader
For Spreaders 23501 & 23502 (Includes 10x 23439 Vane Extensions)
54498
Vane Extension Kit for 8-Vane Spreader
For Spreaders 20240 (Includes 4x 21796 & 4x 21797 Vane Extensions)
54424
Vane Extension Kit for 8-Vane Spreader
For Spreaders 20250 & 20160 (Includes 4x 21796 & 4x 21797 Vane Extensions)
55125
Vane Extension Kit for 8-Vane Spreader
For Spreaders 22007 (Includes 3x 23435, 3x 23436, 1x 23437, & 1x 23438 Vane Extensions)
![Vane Extension Kits](https://www.translandllc.com/wp-content/uploads/2023/12/Vane-Extension-Kits.png)
![QD connect Image Newsletter Q4 V4](https://www.translandllc.com/wp-content/uploads/2023/12/QD-connect-Image-Newsletter-Q4-V4.png)
23499
QD for 25" Gate Boxes
For Ag Cat
23507
QD for All 25" Gate Boxes
23505
QD for 38" Gate Boxes
For Air Tractor & Ag Cat (old style)
25505
QD for 38" Gate Boxes
For Air Tractor & Ag Cat (new style with studs)
23504
QD for 41" Gate Boxes
For Thrush & Dromader
![Hangers](https://www.translandllc.com/wp-content/uploads/2023/12/Hangers.png)
Transland offers hanger kits designed to secure the spreader’s trailing edge directly to the aircraft’s fuselage. If a suitable hanger kit is not available from Transland for your specific model, you will need to procure or fabricate appropriate hangers to ensure the spreader is properly attached at the trailing edge.
58564
Spreader Hanger Kit
No Clevis on Ends
58567
Spreader Hanger Kit
Clevis on One End
58575
Spreader Hanger Kit
Clevis on Both Ends
The Transland Spreader Cart is made from stainless steel with a front-loading design and features a hydraulic lift for ease of use. Its design is so efficient that a single person can easily attach and detach the spreader.
50067
Spreader Cart
![Spreader Cart](https://www.translandllc.com/wp-content/uploads/2023/12/Spreader-Cart.png)