CP Aerial Nozzles

CP Aerial Nozzles2019-02-13T13:00:19-05:00

CP Products division of Transland manufactures a variety of Aerial Nozzles to best fit any Aerial Application need.  CP aerial nozzles are easy to use and easy to maintain. The multiple orifice options on all CP nozzles keep applicators working with minimum time spent changing nozzles.

Nozzle Selection Tools

Utilize the following tools to determine which tips or orifices will best suit application goals.

A set of variables must be known in order to make a selection;

  • Airspeed
  • Swath
  • GPA (Gallons Per Acre)
  • Amount of Nozzles in use

If working in Meters for swath and Liters per Hectare, conversions to Feet and Gallons per Acre will need to be done before using online tools.

Droplet spectrum, or spray quality, is an important part of aerial application. Droplets that are too small may not reach the target and could drift. Droplets that are too large may not give adequate coverage. The USDA models are an excellent starting point for applicators to choose nozzles. All CP nozzles are tested at the USDA facility to gather this useful information and data collected is put into the models.

If you would like assistance with suggested settings click here to complete the Aerial Set up form.

Boom configuration, orifice/deflector condition and many other factors may impact actual spray quality. Operation S.A.F.E. clinics offer applicators the opportunity to verify deposition and  settings. To locate an Operation S.A.F.E. clinic near you click here.


  • Poly Selector: 4 Orifices with shut off. Orifice sizes- .062, .078, .125, .172 Poly Deflector: 3-Way Deflector with 30°, 55° and 90° Deflections. Poly Aerial Standard Body. All parts are available for replacement. CPA230 seal is used inside body. Replacement of seal is recommended annually.  
  • Poly Selector: 5 Orifices with No shut off. Orifice sizes- .062, .078, .093, .125, .172 Poly Deflector: 3-Way Deflector with 30°, 55° and 90° Deflections. Poly Aerial Standard Body. All parts are available for replacement. CPA230 seal is used inside body. Replacement of seal is recommended annually.
  • Poly Selector: 4 Orifices with shut off. Orifice sizes- .062, .078, .125, .172 Stainless Steel Deflector: 3-Way Deflector with 30°, 55° and 90° Deflections. Poly Aerial Standard Body. All parts are available for replacement. CPA230 seal is used inside body. Replacement of seal is recommended annually.  
  • Stainless Steel Selector: 4 Orifices with shut off. Orifice sizes- .062, .078, .125, .172 Stainless Steel Deflector: 3-Way Deflector with 30°, 55° and 90° Deflections. Poly Aerial Standard Body. All parts are available for replacement. CPA230 seal is used inside body. Replacement of seal is recommended annually.  
  • Stainless Steel Selector: 4 Orifices with shut off. Orifice sizes- .062, .078, .125, .172 Poly Deflector: 3-Way Deflector with 30°, 55° and 90° Deflections. Poly Aerial Standard Body. All parts are available for replacement. CPA230 seal is used inside body. Replacement of seal is recommended annually.  
  • Stainless Steel Selector: 4 Orifices with shut off. Orifice sizes- .062, .078, .125, .172 Stainless Steel Deflector: 3-Way Deflector with 30°, 55° and 90° Deflections. Stainless Steel Standard Body. All parts are available for replacement. CPA230 seal is used inside body. Replacement of seal is recommended annually. When replacing the seal in the CP-01-03 a special tool is needed for notching the seal into place. Tool is available for purchase as part number CP-910
  • Stainless Steel Selector: 4 Orifices with shut off. Orifice sizes- .062, .078, .125, .172 Stainless Steel Deflector: 3-Way Deflector with 0° Straight Stream, 5° and 30° Deflections. Stainless Steel Standard Body. All parts are available for replacement. CPA230 seal is used inside body. Replacement of seal is recommended annually. When replacing the seal in the CP-07-3E a special tool is needed for notching the seal into place. Tool is available for purchase, part number CP-910  
  • Stainless Steel Selector: 4 Orifices with shut off. Orifice sizes- .062, .078, .125, .172 Poly Deflector: 3-Way Deflector with 0° Straight Stream, 5° and 30° Deflections. Stainless Steel Standard Body. All parts are available for replacement. CPA230 seal is used inside body. Replacement of seal is recommended annually. When replacing the seal in the CP-07-3E a special tool is needed for notching the seal into place. Tool is available for purchase, part number CP-910  
  • Stainless Steel Selector: 4 Orifices with shut off. Orifice sizes- .062, .078, .125, .172 Stainless Steel Deflector: 3-Way Deflector with 0° Straight Stream, 5° and 30° Deflections. Poly Standard Aerial Body. All parts are available for replacement. CPA230 seal is used inside body. Replacement of seal is recommended annually.  
  • Stainless Steel Selector: 4 Orifices with shut off. Orifice sizes- .062, .078, .125, .172 Poly Deflector: 3-Way Deflector with 0° Straight Stream, 5° and 30° Deflections. Poly Standard Aerial Body. All parts are available for replacement. CPA230 seal is used inside body. Replacement of seal is recommended annually.  
  • CP-11TT Poly Aerial Triple Tip Nozzle comes with 3 Tips of Customers choice installed. This nozzle works well in any airspeed depending on set up. Add versatility to the CP-11TT when used with the CP-06 swivel. Typical tips styles used for helicopters are 80° Flat Fans with CP-06 swivel.